ALLOY
APC100SFP
10/100Base-TX to 100Base-FX Multimode Fibre 1310nm (SC) 802.3at PoE Media Converter. 2km
Alloy’s APC100 Series PoE media converters are standalone media converters used to power PD devices. The media converters give the ability to add POE devices to your network at remote locations where distance limitations do not allow direct copper connections.
The APC100 Series media converters support two types of media 10/100Base-TX and 100Base-FX.
The APC100 Series of media converters are designed for applications where the supply of power to attached Ethernet devices needs to be via the network connection, rather than by a power cord. Typical devices that use this method of powering are VoIP Phones, Wireless Access points and IP based Cameras.
The APC100 Series media converters are fully compliant to the IEEE 802.3at/af standard.
| • | IEEE 802.3at PoE (Power over Ethernet) PSE compatible | |
| • | 10/100Mbps auto-negotiation on RJ-45 copper port | |
| • | Comprehensive PoE functions: PD Signature Sensing, power monitoring and current protection | |
| • | 3 Year Warranty | |
| Speed | |
| • | TX: 10/100Mbps |
| • | FX: 100Mbps |
| Connector Types | |
| • | TX: RJ-45 |
| • | SFP Module (LC) |
| Max Range | |
| • | TX: 100m |
| • | FX: Up to 120Km via SFP Module |
| Duplex | |
| • | TX/FX: Full / Half |
| Flow Control | |
| • | Full Duplex: 802.3x |
| • | Half Duplex: Backpressure |
| Wavelength | |
| • | 1310nm |
| PoE Pins | |
| • | 1, 2, 3 & 6 |
| Total PoE Power | |
| • | Upto 25.5W (802.3at) |
| Diagnostic LEDs | |
| • | POE, PWR, SPD, TX Link/ACT, FX Link/ACT |
| Power Requirement | |
| • | Internal Power Supply 100 ~ 240VAC 50~60Hz |
| Power Requirement | |
| • | 1A @ +5VDC |
| Temperature / Humidity | |
| • | -10°C - 55°C |
| • | 10% - 90% |
| Dimensions / Weight | |
| • | 42(H) x 185(W) x 140(D) mm |
| • | 750 grams |